For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
🎉 Up to 70% Off Selected ItemsShop Sale
AA-DUCT 907 Silver Conductive Epoxy Easy 1 to 1 Mix Ratio
AA-DUCT 907 Silver Conductive Epoxy Easy 1 to 1 Mix Ratio
AA-DUCT 907-MI
AA-DUCT 907 is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10⁻⁴ ohm·cm.
AA-DUCT 907 is also characterized by a wide operating temperature range from –50 to +170°C.
AA-DUCT 907 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties.
Appearance Silver
Cure Type Heat cure or Room temperature
Benefits High strength
Perfect bond
Cold solder for heat-sensitive components
Mix Ratio by weight 100:100 / Resin:Hardener
Glass Transition Temp, Tg 50 °C
Minimum Bond Line Thickness 1mm
Substrates Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.
Typical Applications Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair
UNCURED PROPERTIES
Viscosity @ 25 °C cps Paste
Specific Gravity, mixed 2.79
Reactive solids contents, % 100
Pot Life 1 Hour
Shelf Life 6 Months at room temperature
CURE SCHEDULE
15 minutes @ 100°C
45 minutes @ 50°C
24 hours Room temperature
CURED PROPERTIES
Hardness, Shore D 85
Shrinkage linear in/in 0.0003
Lap shear strength, psi 9400
Volume Resistivity ohm. cm < 0.0001
Thermal Expansion Coefficient, (cm / cm / °C • 10⁻⁵) 1.5
Thermal Conductivity, btu / hr / ft² / °F / in 100
Tensile Strength, psi 9,500
Compressive Strength, psi 14,000
Heat Distortion, °C 170
Operating Temperature °C -50 to +170
HOW TO USE
- Carefully clean and dry all surfaces to be bonded.
- Apply AA-DUCT 907 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
Select Color
From $12.00
Original: $40.00
-70%AA-DUCT 907 Silver Conductive Epoxy Easy 1 to 1 Mix Ratio—
$40.00
$12.00Description
AA-DUCT 907 Silver Conductive Epoxy Easy 1 to 1 Mix Ratio
AA-DUCT 907-MI
AA-DUCT 907 is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10⁻⁴ ohm·cm.
AA-DUCT 907 is also characterized by a wide operating temperature range from –50 to +170°C.
AA-DUCT 907 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties.
Appearance Silver
Cure Type Heat cure or Room temperature
Benefits High strength
Perfect bond
Cold solder for heat-sensitive components
Mix Ratio by weight 100:100 / Resin:Hardener
Glass Transition Temp, Tg 50 °C
Minimum Bond Line Thickness 1mm
Substrates Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.
Typical Applications Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair
UNCURED PROPERTIES
Viscosity @ 25 °C cps Paste
Specific Gravity, mixed 2.79
Reactive solids contents, % 100
Pot Life 1 Hour
Shelf Life 6 Months at room temperature
CURE SCHEDULE
15 minutes @ 100°C
45 minutes @ 50°C
24 hours Room temperature
CURED PROPERTIES
Hardness, Shore D 85
Shrinkage linear in/in 0.0003
Lap shear strength, psi 9400
Volume Resistivity ohm. cm < 0.0001
Thermal Expansion Coefficient, (cm / cm / °C • 10⁻⁵) 1.5
Thermal Conductivity, btu / hr / ft² / °F / in 100
Tensile Strength, psi 9,500
Compressive Strength, psi 14,000
Heat Distortion, °C 170
Operating Temperature °C -50 to +170
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE
- Carefully clean and dry all surfaces to be bonded.
- Apply AA-DUCT 907 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.