AA-BOND F156 High Temp, Fast Cure, Low Visc, 2 Part, Fiberoptics Epoxy Adhesive

AA-BOND F156-5G

 

AA-BOND F156 is a black, solvent free thixotropic epoxy recommended for high quality photographic industry, laminating, production and repair applications where a room temperature cure optically opaque adhesive for light sensitive components is required.

AA-BOND F156 is two parts smooth paste formulation is easy to use, develops strong bonds to itself and to most materials.

AA-BOND F156 exhibits low shrinkage during cure, has excellent dimensional stability over a wide temperature range.

GENERAL PROPERTIES
Appearance    Black
Cure Type    Room Temperature or Heat cure
Benefits    Easy to use
Good low-temperature structural, physical and electrical properties
It’s resistant to water, weather, gases, salts, mild acids, alkalis, and many organic and inorganic compounds
Mix Ratio by weight    100:12 / Resin:Hardener
Substrates    Glass and glass fabrics, ceramics, leather, metals and many plastics
Operating Temperature    -60 to 130 °C
Typical Applications    High quality photographic industry bonding, laminating, production and repair applications where a room-temperature cure optically opaque adhesive for light sensitive components is required
UNCURED PROPERTIES
Viscosity @ 25 °C, cps    50,000 After mixing
Specific Gravity, mixed, g/cc    1.57
Pot life    30 minutes
Reactive solids contents, %    100
CURE SCHEDULE
4 hours    @ 65°C
24 hours    @ 25°C
CURED PROPERTIES
Glass transition temperature (Tg), °C    95
Hardness, Shore D    90
Dielectric Constant    4.3 @ Frequency 1000 Hz
Dielectric Strength    15.4 kV/mm 390 kV/in
GENERAL INFORMATION
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE
Carefully clean and dry all surfaces to be bonded.
Apply this completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY
This epoxy can be supplied in various different packages.

AA-BOND F156-5G