Adhesive Thickness: .08 to 1.0 mils

Tensile Strength at Break: 3800 psi

Elongation: 250%

Dimensional Stability: <.020 in (.0008 mm)

Application Temp.: 40° F (4° C)

Removal Temp.: n/a

Operating Temp.: -40° F to 200° F (-40° C to 93.3° C

QUANTUM II is a 3.0-mil calendered vinyl formulated to provide optimum cutting, weeding,
printing, and release results.
QUANTUM II is intended for a wide variety of interior and exterior cut-film applications and has
been designed to work with the GERBER EDGE®
, GERBER EDGE 2
®
, and GERBER EDGE
FX™ thermal transfer printing systems, in conjunction with GerberColor™ Foils.
INTENDED APPLICATIONS
QUANTUM II can be used to produce signs, graphics, displays, and labels of all types. It has a
clear, permanent, pressure-sensitive adhesive which allows it to be used in two-way marking
applications.
QUANTUM II can be applied to a wide variety of substrates including aluminum, fiberglass,
plastics, glass, and most non-porous painted surfaces. The user is responsible for determining
the suitability of all substrates prior to final application.
This film is not recommended for use on corrugated or highly irregular surfaces or for vehicle
applications (Use Gerber High Performance Series 220, 225, or 3M™ Controltac™ Film 180 for
vehicle applications). It is also not intended for applications where petrochemical contact may
occur. If petrochemical exposure is anticipated, refer to the section below on protecting
graphics.